 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PRELIMINARY June / 2002 Ver.4 TDK Corporation MULTILAYER BALUN SPECIFICATION For W-LAN P/N: HHM1562B [ MECHANICAL DIMENSIONS ] 2.0 0.15 (Top View) 6 5 4 1.25 0.15 1 0.95 01 (Bottom View) 2 3 Pin configuration 1 Unbalanced Port 2 GND or DC feed + RF GND 3 Balanced Port 4 Balanced Port 5 GND 6 N.C. Unbalanced Input 50 ohm 6 1 5 2 4 3 Balanced Output 100 ohm 0.25 +0.1/-0.2 Unit : mm 0.30.2 0.350.2 0.650.2 0.20.2 [ELECTRICAL CHARACTERISTICS] Unbalanced Impedance Balanced Impedance Frequency Range Unbalanced Port Return Loss Phase Imbalance at Balanced Port Amplitude Imbalance at Balanced Port Insertion Loss 50 ohm 100 ohm 5150-5875MHz 10 dB Min. 180 10 deg. 0 2.0 dB 1.0 Max. [TEMPERATURE RANGE] Storage Temperature Operating Temperature -40C ~ +85C -40C ~ +85C [STANDARD PACKAGING QUANTITIES] 2000pcs. /reel Notes : All the technical data and information contained herein are subject to change without prior notice. PRELIMINARY [ Frequency response ] HHM1562B (UNBALANCE 50ohm/BALANCE 100ohm) Return Loss 0 -5 -10 -15 -20 -25 -30 -4 -35 5000 5200 5400 5600 5800 6000 -5 5000 Amplitude Balance 5 Amplitude Balance (dB) Return Loss (dB) 5150 -17.131 5500 -18.741 5725.0 -18.20 5875.0 -17.67 MHz dB MHz dB MHz dB MHz dB 4 3 2 1 0 -1 -2 -3 5150 0.315 5500 -0.197 5725.0 -0.55 5875.0 -0.95 MHz dB MHz dB MHz dB MHz dB 5200 5400 5600 5800 6000 Frequency (MHz) Frequency(MHz) Insertion Loss 0 5150 -0.429 5500 -0.387 5725.0 -0.37 5875.0 -0.44 MHz dB MHz dB MHz dB MHz dB Phase Balance 205 200 5150 179.372 5500 180.283 5725.0 181.41 5875.0 182.94 MHz dB MHz dB MHz dB MHz dB Phase Balance (deg) Insretion Loss (dB) -1 195 190 185 180 175 170 165 160 -2 -3 -4 -5 5000 155 5200 Frequency (MHz) 5400 5600 5800 6000 5000 5200 5400 5600 5800 6000 Frequency (MHz) [ Recommended PCB Pattern ] Bal Port 0 95 0. 1.100 0.800 0.200 0.300 0.300 Unbal Port Bal Port Land Solder resist Through hole(0.3mm) No Pattern solder resist Line width be designed to match 50ohm characteristic impedance, depending on PCB material and thickness. Notes : All the technical data and information contained herein are subject to change without prior notice. 0 15 0. (mm) |
Price & Availability of HHM1562B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |